UWF 3.2 - Fresemaskin

262,000,- eks mva

Spesifikasjoner

- Extremely rigid machine bed made of high-strength HT-200 cast-iron with heavy ribbing
- Large rectangular guideways ensure precision and quiet operation within permissible high loads
- Precision-ground guideways with hardened surfaces for long-term accuracy and wear-resistance
- The milling table features a large setup area and can be rotated in linear direction
- Quiet, precision-made headstock gears with hardened and ground gears
- Universal cutter head swivels on 2 planes - quick change-over from horizontal to vertical machining
- By combining both swivel levels, almost any spatial angle can be set
- Standard outer arbor support with bronze plain bearings accommodates long milling arbors in the horizontal spindle
- Powerful servo-motor for infinite variation of feeds in all 3 axes
- Minimum downtime due to rapid positioning of work table and rapid feeds in all axes
- Control panel swivels for comfortable operation
- Coolant system and chip tray are included
‍
Video
‍
https://youtu.be/bDM2vIrNh74
‍

Working areaTable set up area1370 mm x 320 mmTable load capacity (max.)260 kgTable swivel range r/l45 degNumber of T-slots3 positionsT-slot (width x spacing)14 mm x 80 mm

TravelsTravel X-axis1000 mmTravel Y-axis360 mmTravel Z-axis400 mm

Vertical milling headSpindle speed (vertical)45 1/min - 1660 1/minSpindle mountSK 40 DIN 2080Throat300 mm - 765 mmVertical spindle-to-table surface distance260 mm - 660 mmMilling head swivel range360 deg

Rapid feedRapid feed X-/ Y-axis1335 mm/minRapid feed Z-axis1000 mm/min

Horizontal Milling SpindleSpindle speed (horizontal)35 1/min - 1500 1/minSpindle mountSK 40 DIN 2080Horizontal spindle-to-table surface distance75 mm - 475 mm

FeedFeed speed X-axis30 mm/min - 830 mm/minFeed speed Y-axis30 mm/min - 830 mm/minFeed speed Z-axis23 mm/min - 625 mm/min

Drive capacityMotor rating horiz./ vert.3 kW

Measures and weightsOverall dimensions (length x width x height)1,9 m x 1,75 m x 2 mWeight1950 kg

‍

Mer informasjon

Brosjyre

3-axis position indicator X.Pos 3.2

Collet chuck with collets (4,5,6,8,10,12,14,16 mm diam.)

Horizontal arbor Ø 27 mm

Outer arbor support for horizontal milling

Chip tray

Coolant system

Central lubrication

M16 draw bar

LED work lamp

Operating tools

Operator instructions

‍

No items found.